Ultrices leak detection helps you locate water pipe leaks after the water meter. Fast and without breaking anything. This concerns your internal installation from the water meter to every tap.
We detect leaks using acoustic measurement, thermography, gas tracer, or pressure testing. In walls, floors, and crawl spaces, we follow pipe routes and connections.
After locating a water pipe leak after the water meter, you will receive a report for the insurance company and repair advice. Read our Google reviews regarding leakage after the water meter ; we score five out of five.
Detecting water pipe leaks after the water meter for homes and businesses
We detect water pipe leaks after the water meter daily and without any demolition or breaking. The water meter forms the boundary between the network of Vitens, Dunea, Evides, Waternet, PWN, Oasen, WML and your internal installation. Everything after the water meter is your responsibility according to NEN 1006 and the connection conditions of the water companies. At Ultrices Leak Detection, we pinpoint every leak in copper, central heating pipes, PEX, and Tyleen with pinpoint accuracy using professional detection equipment from FLIR and Ridgid, among others. We operate nationwide, are available 24 hours a day, are on-site within 1 hour in emergency situations, and deliver an Expertise Report within 3 days that insurers accept.
What is a leak after the water meter and why acting quickly pays off
A leak after the water meter is any unintentional water loss on the side of your internal plumbing system, such as around the main valve, check valve, compression fittings, dishwasher or boiler connection, and manifolds. Water seeps into the floor, wall, or crawl space, posing a risk of mold, wood rot, and short circuits. Detecting water pipe leaks after the water meter prevents sky-high water bills, structural damage, and unsafe situations. Thanks to our 99 percent success rate and no cure, no pay policy, you are 100 percent risk-free.
Signs and causes of water pipe leakage after the water meter
You can often recognize a hidden leak by subtle clues. We link these signals to the correct detection technique and root cause in accordance with ISSO guidelines and practical standards from Kiwa and Vewin.
- High water bill: an increase without increased consumption indicates invisible water loss, such as a capillary leak in the floor or cavity. Read more about cost reduction via rising water costs due to leakage.
- Pressure loss and noise: A ticking or hissing sound at standstill and a drop in pressure when turning on the tap indicate micro-leaks and flow losses. Understand the background with causes of pressure loss in piping.
- Damp spots and moldDiscoloration of skirting boards, peeling plaster, and a musty odor are often caused by leaking couplings or porous solder joints.
- Continuously running water meterIf all taps are closed and the meter continues to move, the leak is after the meter, sometimes in the crawl space or under the screed.
Methods we use to detect water pipe leaks after the water meter
We combine multiple techniques to pinpoint exact location without unnecessary demolition. This aligns with NEN 3140 safe working practices and VCA VOL procedures.
- Acoustic correlation: ultra-sensitive microphones and a correlator capture vibration and noise from leaking water to calculate the exact distance between two points.
- Thermographic inspection: with a FLIR infrared camera, we visualize temperature differences in floors and walls caused by evaporation and flow that betray a leak.
- Trace gasWe inject forming gas with five percent hydrogen and ninety-five percent nitrogen into the pipe and detect leaks with a leak detector through tiles and plaster layers.
- Proofreading and debit analysisA manometer and ultrasonic flow meter map pressure drop and unexplained flow, including a test per circuit or tap point.
- Endoscopy and pipe tracerUsing an inspection camera and transmitter-receiver, we determine the pipe layout and check hollow spaces and crawl spaces.
We work cleanly, quickly, and with respect for your property. Read how this works with leak detection without demolition.
Step-by-step plan to detect water pipe leaks after the water meter
- Intake and coordinationWe discuss complaints, construction drawings, and meter readings, and coordinate with your water company or contractor if relevant.
- Shut down and stabilizeWe selectively close groups or the main valve and stabilize pressure to prevent noise and measurement errors.
- Non-destructive measurementsWe combine acoustics, thermography, pressure, and tracer gas for a three-step on-site confirmation.
- Verify and mark: we check the result from multiple measurement points and mark the precise break or connection.
- Report and repair adviceYou will receive an Expertise report within three days with thermal imaging photos, measurements, and a repair plan that insurers accept.
Leak detection process request
Types of leaks after the water meter that we frequently encounter
- Coupling and solder leaks: hairline cracks due to stress or aging, often found in compression fittings or copper T-piece manifolds.
- PEX or Tyleen perforation: damage caused by nails or drilling into walls and floors or by aging conduit transitions.
- Device connections: leaking flexible hoses, mixer taps, boilers, central heating filling lines, and dishwashers cause micro-leaks with major consequential damage.
- Frost and settling: cracks in pipes in the crawl space due to frost or foundation settlement, recognizable by damp sand layers and thermal bridges.
Proven quality and reliability with Ultrices leak detection
We combine 15 years of experience, 5 out of 5 Google review stars, and professional detection equipment with clear guarantees. No solution, no payment, 24/7 service, on-site within 1 hour for emergencies, for business and private clients, partnerships with insurers, and a guarantee on coverage where applicable. Our process complies with NEN 3140 safe working practices, and we work according to the requirements set by water companies and standard documents such as NEN 1006 for drinking water installations.
Solve it now with minimal disruption and maximum coverage
We focus on rapid diagnosis, smart localization, and repairs that are as limited as possible. This prevents unnecessary demolition and costs. For an immediate appointment or emergency, call or WhatsApp 085 080 55 42 or email info@Ultriceslekdetectie.nl. If you would like to delve deeper into our approach for pipes and circuits, view our approach to water pipe leak detection . If you prefer insight into costs and planning first, request a free quote for leak detection after the water meter within 24 hours . This way, we keep your damage low and your insurance company happy.
Frequently asked questions
How do you recognize a water pipe leak after the water meter?
If you notice that the water meter continues to run while all taps are closed, there is likely a leak after the water meter. Turn off appliances that use water and note the meter reading. Return after fifteen minutes. If the indicator wheel moves or the reading has risen, there is a leak in the pipe in your home or business premises.
Other signs include unexplained moisture in the crawl space, soft spots in the floor, a ticking sound in the pipes, loss of pressure at your tap, or a suddenly high water bill from Vitens, Dunea, or PWN. For a quick check, close the main shut-off valve behind the meter and see if the leak stops. Then call immediately for targeted leak detection without demolition work.
How do we trace a leak after the water meter without hacking and breaking?
We combine acoustic correlation and ground microphones to precisely locate leakage sounds in copper and plastic pipes. With thermography, we visualize temperature differences in floors and walls, and with endoscopy, we look inside hollow spaces. In difficult cases, we use tracer gas consisting of 90% nitrogen and 5% hydrogen, which escapes through tiny cracks where we measure it.
Every measurement is performed safely in accordance with VCA VOL and NEN 3140 guidelines and with calibrated equipment. Where necessary, we perform a pressure test to validate the integrity of the pipeline and document everything in a clear report. Without any demolition work, with high accuracy and a proven high success rate thanks to fifteen years of experience at Ultrices Leak Detection.
What do you do about a suddenly high water bill due to a leak after the water meter?
Immediately turn off the main shut-off valve after the water meter and check if the water meter stops. Note meter readings, take photos of any signs of moisture, and switch off any water softeners or filling hoses. Call our emergency service. We operate nationwide, are often at your doorstep within an hour, and work seven days a week, day and night.
We stabilize the situation on-site, perform targeted measurements, and you will receive an expert report for your insurer within three days. If there is no solution, there is no payment; our no cure, no pay promise applies. If you specifically have a leak in the shower or bathroom that persists, schedule our emergency bathroom leak service for immediate assistance.
How much does leak detection after the water meter cost, and is it covered by your insurance?
The costs depend on the accessibility of the pipeline, the building structure, and the required measurement methods. You will receive a free and transparent quote within twenty-four hours. Thanks to work without demolition, you limit repair costs, and the total damage is often lower than with traditional searching.
Consequential damage is often covered by buildings or contents insurance in the Netherlands. We work with insurers and provide a complete leak detection report, including photographic evidence and measurement data. If you would like to see what such a report looks like, please view our section on leak detection reports for bathroom leak insurance . If you prefer an immediate price indication, request a quote for bathroom leak detection.
