Roof leak

How to find a leak at the bottom connection of a dormer frame. You first look at the bottom sill, water barrier, lead flashing, clamping profile, drip sill, and the connection to EPDM or bitumen. Author: Leak Detection Company Waterdicht. Goal: To help you quickly... damage

How do you check a dormer for hidden leaks after installing new roofing? You want to be sure that EPDM, bitumen, or PVC is truly watertight. I am a leak detection specialist and I help you with a simple and thorough approach. Start outside at the dormer...

As a leak detection specialist, I can help you. Look at screw holes in fascia boards, window frames, and side panels, and pay attention to capillary action during driving rain. Check the roofing material, such as EPDM or bitumen, the roof trim, the lead flashing, and all sealant edges. Check if drainage and...

Check the dormer, Trespa or Keralit cladding, fascia board, window frame, lead flashing, water barrier, and EPDM or bitumen roofing. Follow the rainwater drain and downpipe via the collection tank, valley gutter, penetration, and ventilation grille. This is how you find the source of the leak. Note...

How to check a dormer for a leak at the transition between lead and roof tiles is a practical question. Check the connection of the lead flashing and aprons along the fascia board and side cheeks. Note the upstand, cracks, and oxidation. Look for signs of leakage near the roof tiles and...

Check window frames, glazing beads, sealant joints, and rubbers. During heavy rain, water often creeps inside past a loose rubber seal. If this happens, go outside. Inspect roofing materials such as EPDM or bitumen, the lead flashing, and the roof trim. Look along fascia boards and side panels, around...

How to check a dormer drain for blockages and backflowing rainwater is exactly what you want to know if you see puddles near the dormer after a shower, droplets on the windowsill, or a musty smell. This way, you prevent damp spots, mold, and rot in wood and...

How to check the roof edge of a dormer for hairline cracks in the finish helps you with this. I am a leak detection specialist and I will show you the right spots. Check the roof edge, fascia board, and roof trim. Inspect wooden or Trespa fascia boards, the EPDM or bitumen edge, the zinc...

A leak in a dormer often originates at the connections of the roof edge, frame, and lead flashing. Dormer leakage is caused by weak links such as the fascia board, cheeks, bitumen or EPDM roofing, clamping strip on the lead, sealant joints, screw holes, and the gutter with...

You see a wet ceiling or a brown stain near the interior wall while water is penetrating at the side panels or fascia board. That feels strange, but water seeks the easiest path. Causes include EPDM or bitumen roofing, lead flashing around roof tiles, sealant joints around...

Dormer leaks frequently occur at connection details rather than in the middle of the roof surface. I explain where things often go wrong and how to look specifically without unnecessary demolition or guesswork. Consider the connection with roof tiles, lead flashing along the side cheeks, fascia board, and window frame...

I am a leak detection specialist. With 9 tips for inspecting a dormer roof edge without immediately dismantling it, I help you find damage and leaks in time. You don't have to break anything open, just look smart and measure precisely. You look at the dormer...