Blog
Ultrices Leak Detection operates throughout the Netherlands. On this page, you will find all the locations where we perform leak detection, from major cities to nearby villages. This is handy if you want to quickly check if we also visit your area.
Whether it concerns a leak in the bathroom, kitchen, roof, water pipes, or underfloor heating: we come to the location, locate the cause without any demolition work, and deliver a clear expert report within 3 working days. This way, you quickly know where the problem lies and can have targeted repairs carried out, with minimal inconvenience and less risk of consequential damage.
DISCOVER MORE
How do you check a wall for moisture from an adjacent technical room?
You want to know how to check a wall for moisture from an adjacent technical room. Look for signs such as damp spots, mold, salt efflorescence, and a musty odor. As a leak detection specialist, I will walk you through a smart check. In such a technical room…
You want to know how to check a dormer for rainwater entering through screw holes.
As a leak detection specialist, I can help you. Look at screw holes in fascia boards, window frames, and side panels, and pay attention to capillary action during driving rain. Check the roofing material, such as EPDM or bitumen, the roof trim, the lead flashing, and all sealant edges. Check if drainage and…
How do you check a bathroom corner for water ingress via sealant, grout, and waterproofing tape?
Read here how to check a bathroom corner for water ingress via sealant, grouting, and waterproofing tape. As a leak detection specialist, I help you with a quick check of the waterproofing joint, sealing, substrate, and tiling. Look out for mold, discoloration, limescale, damp spots, and…
How do you check a bathtub surround for hidden leaks under the rim?
As a leak detection specialist, I help you with how to check a bathtub surround for hidden leaks under the rim. You don't want water damage behind the surround. With simple steps, you can quickly discover where water is escaping. Start at the rim and silicone sealant. Feel along…
How do you check a plastic water pipe for pressure loss and small cracks?
How do you check a synthetic water pipe for pressure loss and small cracks? Think of PVC, PE, or PEX in your home. The leak is often located at couplings or bends. I will give you a quick approach. Start at the water meter. Note the reading. Close all taps and check if the…
You want to quickly know how to check a ceiling for active leakage without opening up the entire surface.
Think of a smart, non-invasive approach that quickly reveals whether you are dealing with an actual leak or just condensation. With a moisture meter and hygrometer, you can immediately see where the moisture is located. An infrared camera shows cold streaks around pipework, roofing, and…
How do you check a underfloor heating system for heat loss when it is idle in the summer?
In the summer, your underfloor heating is idle, yet you can still experience pressure loss. The focus is on how to check an underfloor heating system for loss when it is idle in the summer. I am a leak detection specialist, and this explanation helps. Start with the central heating boiler and the…
How do you check for a leak after renovation when multiple building components have been modified at the same time?
How do you check for a leak after a renovation when multiple building components have been modified at the same time? Written by a leak detection specialist to give you peace of mind quickly. Think of the roof and roofing, facade and window frames, bathroom, kitchen, and plumbing. I start with…
You have moved pipework and want to be sure that the interior wall stays dry.
I am a leak detection specialist and I will show you how to smartly check an interior wall for leaks after relocating pipework. Check water pipes, central heating pipes, and drains with a pressure test and pressure gauge. Then use a moisture meter, hygrometer,…
You tackle How to check a dormer for a leaking rainwater drain behind cladding with a roof inspection.
Check the dormer, Trespa or Keralit cladding, fascia board, window frame, lead flashing, water barrier, and EPDM or bitumen roofing. Follow the rainwater drain and downpipe via the collection tank, valley gutter, penetration, and ventilation grille. This is how you find the source of the leak. Note…